E-mail : seapcp5000@hotmail.com

News

Home  >  News

How to solve the color problem of UV Flatbed Printer?

Mar. 08, 2019

How to solve the color problem of UV Flatbed Printer? The main factors affecting this operation are determined by four factors: color, ink, software, and temperature.

1, uv flatbed printer coloring problem

Solution: Restore the value of the color curve set at the factory. If it is not, you can contact the technician of the manufacturer to modify it remotely. If you are changing a new type of uv ink, you need to recreate the color curve.

2, UV Flatbed Digital Printer ink problem

Solution: Different types of uv inks have different color saturation, brightness, color gamut, etc. After replacing the new uv ink, it will inevitably lead to pattern printing color problems, and it is necessary to recreate the color curve. Secondly, the ink points are different. When printing the test chart, it is necessary to observe the state of the nozzle hole. If there is a blockage, the ink is not smooth, and the nozzle needs to be cleaned. Finally, the problem of ink precipitation, the uv ink that is not used for a long time, the internal pigment will have precipitation problems, and it needs to be fully stirred before use. If it condenses and becomes viscous, it means that the uv ink has expired and needs to be replaced.

3, uv flatbed printer software failure

Solution: Reinstall the software of the uv flatbed printer. If the value is wrong, you need to re-recover it. Note that before reinstalling, you need to disinfect the computer and add the uv tablet printer software to the whitelist of anti-virus software.

4, uv flatbed printer is affected by temperature

Solution: The outside temperature is between 15 ° C and 30 ° C. The uv flatbed printer has a good factory temperature. If the temperature is too low, an air conditioner should be installed. If the temperature is too high, it needs to be cooled.

UV Flatbed Digital Printer


Contact Us
  • Mob. : +86 186 0088 7354
  • Mob. : +86 137 1681 7218
  • Tel : +86 10 6857 8888
  • WeChat : QI260488345
  • WeChat : zhouaimei8888
  • E-mail : seapcp5000@hotmail.com
  • Add.: Room 301 No. 2 South Zone, No.25 Yongxing Road, Daxing District, Beijing China, 102629.

Copyright © Beijing Zhongpin Science and Technology Development Co., Ltd. All Rights Reserved | Sitemap |